Matériaux en graphite
Max Graphite propose une gamme complète de matériaux en graphite à grain fin et structurels, conçus pour des applications dans les semi-conducteurs, les systèmes énergétiques, le traitement thermique, et bien plus encore.
Made to print.
Most of what leaves our machining floor is not a catalog item. It is a part built to a customer's print, for a customer's furnace, fixture, or process.
There are three ways to begin:
Made to print
Send us your 2D or 3D files. We review the geometry, confirm the grade, quote the part, and machine it.
Made from sample
Send a physical part — an existing component, a worn part, or a photographed item you need matched. We review it, define the grade, and reproduce it.
Co-engineered
When the geometry is still open, our engineers work with yours: grade selection, tolerance strategy, coating choice, and machining allowance, settled before the first cut.
Graphite Machining
Isostatic, molded, extruded, and vibrated graphite machined to print — plates, cylinders, rods, tubes, dies, and machined components.
CFC Machining
2D, 2.5D, and 3D carbon/carbon composite machined into fixtures, fasteners, plates, springs, and cylinders for high-load, high-temperature service.
Custom Felt
Soft and rigid felt in PAN, rayon, and pitch — cut to size, formed into cylinders and boards, or specified by fiber type and formulation for your furnace.
Graphite Coating
SiC, PyC, PyG, and phosphate coatings applied to graphite substrates for chemical protection, purity control, and surface performance.
Felt Coating
Foil, cloth, painted, and CFC surface treatments for rigid felt insulation — including rigid felt cylinders with 3 mm CFC facing.
CFC Coating
Painted, PyC, SiC, and BN coatings on carbon/carbon composite parts, matched to the chemistry of your process environment.
The Factory Behind the Products
We are the manufacturer, not the layer in front of one.
Our facility in Heibei, China runs 50,000 MT of annual production capacity. We are vertically integrated: raw material, felt, machining, and composites all happen inside our own operation. That means the graphite in your part and the machining that shapes it answer to the same quality system — and when a tolerance is tight or a lead time is short, there is no third party in the chain to negotiate with.
Maximum Part Envelope
From small precision components to large-format plates, cylinders, and blocks. If you are unsure whether your geometry fits, send the drawing and we will confirm.
Tolerance Capability
Tolerances are set with you before the first cut — matched to the grade and the application, not applied blindly. Tight-tolerance work is quoted against the specific feature that needs it.
Coating Lines
In-house coating means the part is machined and finished in the same operation — SiC, PyC, PyG, phosphate, and CFC surface treatments applied without shipping the part out and back.
Quality, Built Into Every Custom Part
99% product conformity, held by every one of our graphite chemists and engineers in-house. Every custom part is checked from incoming raw material through to final inspection, and every lot carries a batch code that traces back to its material and key process records — the audit-ready trail a custom order needs.
Certifications, inspection detail, and our full quality protocol are set out on our Services & Quality Control page.
To protect our client's privacy, we've blurred the markings on the graphite block shown here. Our quality-control procedures and track record are available on request.
Products You Maybe Interested In—
Panneaux et cylindres en feutre rigide de graphite
Feutre de graphite à base de brai
Feutre de graphite à base de PAN
Feutre de graphite à base de rayonne
Usinage sur mesure de CFC (composite carbone-carbone)
Cylindre de moule de pressage à chaud en CFC | Moule de pressage à chaud en composite C/C
Disque de frein CFC | Frein C/C | Frein carbone-céramique
Plaque CFC à fibres courtes
Moules de moulage sous pression en graphite
Morceaux de graphite
Tube en graphite
Tige de graphite
Accessible Excellence, Applied to Your Part
Advanced materials should be within reach. That is what Accessible Excellence means, and a custom part is where it gets tested: the right grade, the right tolerance, the right coating, quoted honestly and shipped from the factory that made it.
Send the drawing. We will tell you what we can do with it.